DEPARTMENT OF MECHANICAL AND MATERIALS ENGINEERING
Ahsan Mian's Research

People

Facilities

Publications

Useful Links

 People

Dr. Ahsan Mian, Director
Tel: (937) 775-5143; Email: ahsan.mian@wright.edu
Office: 126 Russ Engineering Building

Web: http://www.cecs.wright.edu/~ahsan.mian

Current Students

  • Vignesh Asam (Ph.D. MAE)
  • Hisham Etwel (Ph.D. MAE)
  • Arashdeep Singh (Ph.D. MSE)
  • Fuzail Shad (Ph.D. MAE)
  • M. Meghna Attaluri (MS ME)
  • Nabil Bhuyan (MS ME)
  • Branen Bussey (MS MSE)
  • Justen Bussey (MS EE)
  • Bienvenue Munyurwe (MS ASE)
  • Mahim Sheikh (MS ME)
(MAE Mechanican and Aerospace Eng. MSE Materials Science and Eng., ME Mechanical Eng., EE Electrical Engineering, ASE Aerospace Systems Eng.)

Spring 2026:

Spring 2026

(From left: M. Meghna Attaluri, Jeet Thapa, Ahsan Mian, Fuzail Shad, Lucas Clark, Mahim Shaikh,  Arashdeep Singh,  Vignesh Asam, Bienvenue Munyurwe, Branen Bussey, and Justen Bussey)

 Spring 2025:

Pring 2025_2
(From left: Jeet Thapa, Bienvenue Munyurwe, Adedamola Adeyemi, Lucas Clark, Arashdeep Singh,Ahsan Mian, Vignesh Asam, Branen Bussey, and M. Meghna Attaluri)

Spring 2024:

Sp 2024 pic 2
(From left: Eyad Balubaid, Dr. Tahseen Alwattar, Lemuel Duncan, Adedamola Adeyemi, Ahsan Mian, Arashdeep Singh, Lucas Clark, and Vignesh Asam)

Spring 2023:

Spring 2023_1
(From left: Katie Bruggeman, Lemuel Duncan, Habib Ajose, William Metzger, Lucas Clark, Rhys Jones, Ahsan Mian, Alex Adams, Mustafa Muhammad, and Arashdeep Singh)
Spring 2023_2
(From left: Mustafa Muhammad, Habib Ajose, Arashdeep Singh, William Metzger, Lucas Clark, and Imabin Ekpelu)

Fall 2021:

Fall 2021
(From left: Kaitlin Willi, Hasanain Abdulhadi, Ahsan Mian, Abdalsalam Fadeel, Lucas Becker, and Sainath Mandala)

Collaborators

Dr. Mohammod Ali, Professor, University of South Carolina, SC
Dr. Fathi Amsaad, Assoc. Prof., Wright State University
Dr. Carrie Bartsch, AFRL Sensors Directorate
 Dr. Emily Heckman, AFRL Sensors Directorate
Dr. Ahmad Islam, AFRL Sensors Directorate
Dr. Oshadha Ranasingha, Asst. Prof., University of Massachusettes, Lowel
Dr. Cogan Shimizu, Assoc. Prof., Wright State University
Dr. Raghaban Srinivasan, Emiritous Professor, Wright State University
Dr. Daniel Young, Professor, Wright State University

Graduate Students Advised

  1. Lucas Clark (Ph.D. MSE, Summer 2026 2026, Wright State University). Dissertation title: Multifunctional Nanocomposites for Localized Radiation Shielding of Space Electronics
  2. Jeet Thapa (MS ME, Spring 2026, Wright State University). Thesis title: Orientation-Dependent Anisotropy and Strain-Rate Sensitivy of Selective Laser Sintered PA12 and Glass-Filled PA12 Composites under Compression
  3. Adedamola Adeyemi (MS ME, Fall 2025, Wright State University). Thesis title: Effect of Build Orientation and Environmental Conditions on Mechanical and Geometric Properties of Polymeric Parts Fabricated by Powder Bed Fusion Process
  4. Alex Adams (MS ME, Summer 2025, Wright State University). Thesis title: Evaluating Geometric Accuracy in 3D Printing (3DP) Comparative Study of Different 3DP Processes Using CMM and Vision Measurement Tools
  5. Lemuel Duncan (MS ME, Spring 2024, Wright State University). Thesis title: Mechanical Reliability of Aerosol Jet Printed Sensors and Interconnects
  6. William Metzger (MS MSE, Summer 2023, Wright State University). Thesis title: Characterization of Aerosol Jet Printed Silver Thin Films Sintered by a Scanning Laser
  7. Mustafa Muhammad (MS MSE, Summer 2023, Wright State University). Thesis title: Processing and Characterization of Inkjet Printed BaTiO3/SU-8 Nanocomposite Dielectrics
  8. Lucas Clark (MS MSE, Spring 2023, Wright State University). Thesis title: Direct Ink Write Processing of Signal Crossovers Using Aerosol Jet Printing Method
  9. Habib Ajose (MS MSE, Spring 2023, Wright State University). Thesis title: Rheological Modeling and Inkjet Printability of Electrode Ink formulation for Miniature and Interdigitated Lithium-Ion Batteries
  10. Imabin Ekpelu (MS ME, Spring 2023, Wright State University). Thesis title: Surface-Based 3D Printed Polymeric Lattice Structures for Vibration Attenuation
  11. Jesse Leiffer (MS ME, Fall 2022, Wright State University). Thesis title: Behavior of 3D Printed Polymeric Triply Periodic Minimal Surface (TPMS) Cellular Structures under Low Velocity Impact Loads  
  12. Abdalsalam Fadeel (Ph.D., Spring 2021, Wright State University). Dissertation title: Development and Application of a Computational Modeling Scheme for Periodic Lattice Structures
  13. Hasanain S. Abdulhadi (Ph.D., Fall 2020, Wright State University). Dissertation title: Designing New Generations of BCC Lattice Structures and Developing Scaling Laws to Predict Compressive Mechanical Characteristics and Geometrical Parameters
  14. Tahseen Al Wattar (Ph.D., Fall 2020, Wright State University). Dissertation title: Developing Equivalent Solid Model for Lattice Cell Structures using Numerical Approaches
  15. Aamir H. Hamad (Ph.D., Spring 2020, Wright State University). Dissertation title: Additive Manufacturing Techniques to Enhance the Performance of Electronics Created on Flexible and Rigid Substrates
  16. Eyad Balubaid (MS, Fall 2019, Wright State University). Thesis title: Preparation and Characterization of Porous PDMS for Printed Electronics
  17. Sivani Patibandla (MS, Fall 2018, Wright State University). Thesis title: Layer-to-Layer Physical Characteristics and Compression Behavior of 3D Printed Acrylonitrile Butadiene Styrene Metastructures Fabricated using Different Process Parameters
  18. Sai Avinash Yadlapati (MS, Summer 2018, Wright State University). Thesis title: Influence of FDM Build Parameters on Tensile and Compression Behaviors of 3D Printed Polymer Lattice Structures
  19. Sandeep Keerthi (MS, Fall 2017, Wright State University). Thesis title: Low Velocity Impact and RF Response of 3D Printed Heterogeneous Structures
  20. Mohammed Al Rifaie (MS, Summer 2017, Wright State University). Thesis title: Resilience and Toughness Behavior of 3D-Printed Polymer Lattice Structures
  21. Sagar Sangle (MS, Summer 2017, Wright State University). Thesis title: Design and Testing of Scalable 3D-Printed Cellular Structures Optimized for Energy Absorption
  22. Andrew J. Turner (MS, Spring 2017, Wright State University). Thesis title: Low-Velocity Impact Behavior of Sandwich Panels with 3D Printed Polymer Core Structures
  23. Chandrakanth Kusuma (MS, Spring 2016, Wright State University). Thesis title: The Effect of Laser Power and Scan Speed on Melt Pool Characteristics of Pure Titanium and Ti-6Al-4V alloy for Selective Laser Melting
  24. Sazzad H. Ahmed (MS, Fall 2016, Wright State University). Non-thesis
  25. Corey Cook (MS,  Spring 2013, Montana State University). Thesis title: A finite element approach to predicting vibrothermographic heat detections of fully embedded delaminations within composite plates
  26. Adrien Lambert (MS, Fall 2012, Montana State University). Thesis title: Thermal-Mechanical Characterization of System Level Electronic Packages for Space Applications 
  27. Kanishka Joshi (MS, Summer 2012, Montana State University). Thesis title: Biomechanical Analysis of a Cricket Filiform Hair Socket under Low Velocity Air Currents
  28. Darren Platt (MS, Spring 2012, Montana State University). Thesis title: Development of Effective Numerical Schemes for Frictional Heat Generation and Diffusion in Vibrothermography 
  29. Anthony Trudnowski (MS, Fall 2011, Montana State University). Thesis title: Parametric Study of Heat Diffusion in Vibrothermography using Analytical and Numerical Methods 
  30. Anamika Mishty (MS, Fall 2011, Montana State University). Thesis title: Dynamic Response of Mini-Cantilever Beams in Viscous Media 
  31. Robert Cassel (MS, Spring 2008, Montana State University). Thesis title: Design and Fabrication of VDP Structure Based MEMS Pressure Sensor
  32. Jesse Law (MS, Summer 2007, Montana State University). Thesis title: Application of van der Pauw Structure as a Piezoresistive Pressure Sensor